Verification of Vehicle Repair

After a repair, it is essential to verify that the fault has been corrected.

1. Connect scantool and select "DTC" button.
2. Press "DTC Status" button and confirm that "DTC Readiness Flag" indicates "Completed". If not, drive the vehicle within conditions noted in the freeze frame data, or drive the vehicle within the "Enable Conditions" shown in DTC DETECTING CONDITION CHART.
3. Read "DTC Status" parameter.
4. Is parameter displayed "History (Not Present) fault"?

   YES 

   • System performing to specification at this time. Clear the DTC.

   NO 

   • Go to the appropriate troubleshooting procedure.