LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2010 >> Forte EX, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transaxle Control System - A5CF2) >> Output Speed Sensor >> Description and Operation >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Description and Operation: Description

WARNING: This page is about a different variant/trim than selected.
OUTPUT SPEED SENSOR SPECIFICATIONS AND FUNCTION

Sensor type
  1. Type : HALL SENSOR
  2. Output voltage : DC 12V
  3. Current consumption : 22mA (Max)
Function
  1. Output speed sensor : Detect the output shaft RPM (T/F DRIVEN GEAR RPM) at the T/F driven gear
  2. Feedback control, clutch-clutch control, damper clutch control, shift range control, incorrect ratio control and sensor trouble detection signal.
Connector
G06494639Courtesy of KIA MOTORS AMERICA, INC.
AIR GAP, SENSOR RESISTANCE, AND OUTPUT VOLTAGE CHART

Item Inspection item Standard value
Air gap Output speed sensor 0.025in (0.65mm)
Sensor resistance Output speed sensor Over 1 MΩ
Output voltage HIGH Over 4.8V
LOW Below 0.8V
scientia non olet · About LEMON Manuals