September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Description and Operation: Description
INPUT SPEED SENSOR SPECIFICATIONS AND FUNCTION
| Sensor type |
- Type : HALL SENSOR
- Operating voltage : DC 12V
- Current consumption : 22mA (Max)
|
| Function |
- Input speed sensor: Detect the input shaft rotation at the OD & REV retainer side to control oil pressure when shifting.
- Feedback control, clutch-clutch control, damper clutch control, shift range control, incorrect ratio control and sensor trouble detection signal.
|
| Connector |
 Courtesy of KIA MOTORS AMERICA, INC.
|
AIR GAP, SENSOR RESISTANCE, AND OUTPUT VOLTAGE CHART
| Item |
Inspection item |
Standard value |
| Air gap |
Input speed sensor |
0.035in (0.9mm) |
| Sensor resistance |
Input speed sensor |
Over 1 MΩ |
| Output voltage |
HIGH |
Over 4.8V |
| LOW |
Below 0.8V |