Specifications Index
RIO SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | SPECIFICATIONS | ||
| Torque | N/A | ||
| Axle Nut/Hub Nut | 145-188 ft. lbs. (200-260 N.m) | ||
| Battery | BATTERY | ||
| Brakes | |||
| Bleeding Sequence | BLEEDING OF BRAKE SYSTEM | ||
| Disc Brakes | SPECIFICATIONS | ||
| Drum Brakes | SPECIFICATIONS | ||
| Torque | |||
| Front | COMPONENTS | ||
| Rear | COMPONENTS | ||
| Charging | |||
| Generator | ALTERNATOR | ||
| Torque | N/A | ||
| Drive Belts | |||
| Adjustment | DRIVE BELT | ||
| Belt Routing | DRIVE BELT | ||
| Engine Cooling | |||
| General Service Specifications | SPECIFICATIONS | ||
| Radiator Cap Pressure | 14-18 psi | ||
| Thermostat R & I | THERMOSTAT | ||
| Water Pump R & I | WATER PUMP | ||
| Engine Mechanical | |||
| Compression | COMPRESSION PRESSURE INSPECTION | ||
| Oil Pressure | 100kPa (1.0kg/cm2 , 14.5psi) or above at 800rpm | ||
| Overhaul | SPECIFICATIONS . | ||
| Torque | TIGHTENING TORQUE | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flexplate Torque | 87-94 ft. lbs. (118-128 N.m) | ||
| Fuel System | |||
| Fuel Filter Location | REMOVAL (INCLUDING FUEL FILTER AND FUEL PRESSURE REGULATOR) | ||
| Pressure Specification | 343 kpa (3.5 kgf/cm2 , 49.8 psi) | ||
| Fuel Pressure Test Procedure | FUEL PRESSURE TEST | ||
| Fuel Pressure Release Procedure | FUEL PRESSURE TEST | ||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Ignition Wires (Resistance) | IGNITION SYSTEM | ||
| Ignition Wires (Routing) | SPARK TEST | ||
| Spark Plugs | IGNITION SYSTEM | ||
| Starting | |||
| Starter | STARTER | ||
| Torque | N/A | ||
| Wheel Alignment | |||
| Adjustment Specifications | FRONT WHEEL ALIGNMENT REAR WHEEL ALIGNMENT |
||
| Torque | TIGHTENING TORQUE | ||
| Wheel & Tire | |||
| Lug Nut Torque | 65-79 ft. lbs. (90-110 N.m) | ||