LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2010 >> Rondo EX, 2.4 9 >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> SRS Control Module >> Front Impact Sensor (FIS) >> Repair Procedure >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedure: Removal

CAUTION:
  • Removal of the airbag must be performed according to the precautions/procedures described previously.
  • Before disconnecting the front impact sensor connector, disconnect the front airbag connector(s).
  • Do not turn the ignition switch ON and do not connect the battery cable while replacing the front impact sensor.
  1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  2. Disconnect the Front Impact Sensor connector.
  3. Remove the Front Impact Sensor mounting bolt.
    Fig 1: Identifying Front Impact Sensor Mounting Bolt
    G06385141Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the Front Impact Sensor.
scientia non olet · About LEMON Manuals