LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2010 >> Rondo EX, 2.4 9 >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> SRS Control Module >> SRS Control Module (SRSCM) >> Repair Procedure >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedure: Removal

  1. Remove the ignition key from the vehicle.
  2. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
  3. Disconnect the DAB, PAB, SAB, CAB and BPT connectors.
  4. Remove the floor console and heater ducts. (Refer to CONSOLE )
  5. Disconnect the SRSCM harness connector from the SRSCM.
    Fig 1: Identifying SRSCM & Harness Connector
    G06385138Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the SRSCM mounting nuts (3EA) from the SRSCM, then remove the SRSCM.
    Fig 2: Identifying SRSCM Mounting Nuts
    G06385139Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals