LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2010 >> Rondo EX, 2.4 9 >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> SRS Control Module >> Seat Track Position Sensor (STPS) >> Repair Procedure >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedure: Installation

CAUTION: Be sure to install the harness wires not to be pinched or interfered with other parts.
  1. Remove the ignition key from the vehicle.
  2. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  3. Install the STPS with two screws.
  4. Install the front seat assembly. (Refer to FRONT SEAT )
  5. Reconnect the battery negative cable.
  6. After installing the Seat Track Position Sensor, confirm proper system operation:

    Turn the ignition switch ON, the SRS indicator should be turned on for about six seconds and then go off.

scientia non olet · About LEMON Manuals