Check fog lamp

Ignition "ON" & engine "OFF"
Disconnect fog lamp light bulb.
Measure the resistance between both terminals of fog lamp light bulb.
1. Specification : approx. 0.04Ω (If light bulb fails, ∞Ω is measured.)
Fig 1: Measuring Resistance Between Terminals Of Fog Lamp Light Bulb
Courtesy of KIA MOTORS AMERICA, INC.
Is the measured resistance within the specification?
YES
1. Go to Check FAM .
NO
1. Replacing the light bulb with 'light bulb for test', if normal operating condition is confirmed, Replace 'light bulb for test' with 'new light bulb' and go to "VERIFICATION OF VEHICLE REPAIR ".