LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2011 >> Optima SX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Control System - 2.4L) >> Camshaft Position Sensor (CMPS) >> Repair Procedures >> Removal >> Bank 1/Intake
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Bank 1/Intake

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor.
Fig 1: Camshaft Position Sensor Connector & Bolt (Bank 1/Intake)
G07381665Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals