Connector [CHG-B]
TCM TERMINAL CONNECTOR REFERENCE CHART
| Pin No. | Signal | Condition | Type | Level |
|---|---|---|---|---|
| 1 | Shift solenoid D (VFS-OD) | Ouput | Dither frequency : 250~300Hz Base frequency :2~ 4KHz | |
| 3 | Input speed sensor signal | High | Input | 40% 0.5Hz |
| Low | ||||
| 4 | Output speed sensor signal | High | Input | 40% 0.5Hz |
| Low | ||||
| 26 | Torque converter clutch solenoid (VFS-T/con) | Ouput | Dither frequency : 250~300Hz Base frequency :2~ 4KHz | |
| 27 | Shift solenoid C (35R-VFS) | Output | 0V/Vbatt Level 9V < Vbatt Level < 16V | |
| 28 | Shift solenoid E (SS-A) | Output | 0V/Vbatt Level 9V < Vbatt Level < 16V | |
| 29 | Power input speed | ON | Power | Voltage Range : 8V ± 0.25V |
| OFF | ||||
| 51 | Pressure control solenoid A(VFS-LINE) | Output | 0V/Vbatt Level 9V Level<16V | |
| 52 | Shift solenoid A(VFS-UD) | Output | 0V/Vbatt Level 9V Level<16V | |
| 53 | Shift solenoid F (SS-B) | Output | 0V/Vbatt Level 9V Level<16V | |
| 54 | Power output speed | ON | Power | Voltage Range : 8V ± 0.25V |
| OFF | ||||
| 55 | Oil temperature sensor (-) | ON | Power | Vmax=3.26V @ -40°C Vmin=0.29V @ 150°C |
| OFF | ||||
| 76 | Solenoid power 1 | ON | Power | BATT± 0.1V @ 450RPM ↑ |
| OFF | ||||
| 77 | Solenoid power 2 | ON | Power | BATT± 0.1V @ 450RPM ↑ |
| OFF | ||||
| 78 | Shift solenoid B (VFS-26B) | Output | 0V/Vbatt Level 9V < Vbatt Level < 16V |