LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2011 >> Soul Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transaxle Control System - 2.0L) >> Input Speed Sensor >> Repair Procedures (A4CF2) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures (A4CF2): Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the new O-ring to the input speed sensor.
  2. Install the input speed sensor (A).

    Tightening torque: 

    10~12 Nm (1.0~1.2kgf.m, 7~8 lb-ft)

    CAUTION: While installing the input shaft speed sensor, do not allow dust or other foreign particles to enter the transaxle.
    Fig 1: Identifying Input Speed Sensor
    G06523626Courtesy of KIA MOTORS AMERICA, INC.
  3. Check the connector for dust, dirt, or oil, and then connect the input speed sensor connector (A) securely.
    Fig 2: Identifying Input Speed Sensor Connector
    G06523627Courtesy of KIA MOTORS AMERICA, INC.
  4. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals