Crash Unlock Function (Without 30 Sec Timer)
WARNING: This page is about a different car, the 2013 Kia Sportage and 2012 Kia Sportage. However, it is still accessible from the selected car via links, so may be relevant.
- Behavior Characteristics
- This function is to make unlock status in emergency case.
- If the crash is occurred (b_Crash ==On, when P_CrashUnlock signal is changed to crash status), output all doors unlock during "CrashUnlockTime"
- After crash unlocking, If safety knob state is changed unlock to lock, all doors are unlocked, again.
- After crash is activated, Central Lock and Auto Door Lock Function can not operate until Key off.
- P_CrashInput signal (PWM)
- Before crash: When crash condition is not present, input is made as follows (b_Crash ==Off at P_CrashInput signal event is as follows)
- After Crash:
- When crash happen, input is made as follow signal.
- BCM should be enabled (b_Crash ==On) when received at least one pulse during P_CrashInput signal appeared.
- P_CrashInput signal activated during 200 ms after crash.(10 cycle)
- State Description
VALUE SPECIFICATION CHART
| Name | Value |
|---|---|
| Crash Off Delay Time | 0 msec |
| Crash Out Time | 5 ± 0.5 sec |