General Information: DTC Detecting Condition
WARNING: This page is about a different variant/trim than selected.
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
- Signal output of left side sensor and LIN line checking
|
- TX line of RPAS-SLH(Left side sensor) open or poor connection
- Ground line of RPAS-SLH(Left side sensor) open or poor connection
- Power line of RPAS-SLH(Left side sensor) open or poor connection
- Replace a sensor after checking a wire of RPAS-SLH(Left side sensor)
|
| Enable Conditions |
|
| Threshold Value |
- Sensor fault
- LIN communication fault
- Poor connection
- LIN line open
|
| Diagnostic Time |
- Immediately (1 check lasts 0.3sec after IG KEY ON)
|
| DTC Erasing Time |
- DTC is erased immediately after trouble fixed
|