Evaporator Temperature Sensor / Switch: Service and Repair

Inspection

1. Turn the ignition switch OFF.
2. Disconnect the evaporator temperature sensor connector.
3. Measure resistance between terminal "+" and "-" of evaporator temperature sensor.




4. Connect the evaporator temperature sensor connector.
5. Run the engine and turn the A/C switch ON, then measure the voltage between the terminals of harness connector.
Specification






Replacement

1. Disconnect the negative (-) battery terminal.
2. Disconnect the evaporator temperature sensor connector (A).




3. Remove the evaporator temperature sensor (A) by pulling it out after rotating 90° in a counterclockwise direction.




4. Install in the reverse order of removal.