LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2012 >> Sedona EX >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch Assembly >> Ignition Switch >> Repair Procedures >> Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel. Refer to CRASH PAD .
    Fig 1: Crash Pad Lower Panel
    G07390134Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the screws (2 EA) and trip switch connector. Then remove the crash fascia panel (B).
    Fig 2: Crash Fascia Panel & Screws
    G07390135Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the ignition switch (A) after loosening the screw with IG ON and disconnecting the 6P connector.
    Fig 3: Ignition Switch
    G07390136Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the door warning switch and key illumination lamp (A) after loosening the screws (B) and disconnecting the 6P connector.
    Fig 4: Door Warning Switch & Key Illumination Lamp
    G07390137Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the key lock cylinder (C) after pushing lock pin (B) with key ACC.
    Fig 5: Key Lock Cylinder & Locking Pin
    G07390138Courtesy of KIA MOTORS AMERICA, INC.
  7. Installation is the reverse of removal procedure.
scientia non olet · About LEMON Manuals