Repair procedures: Removal

WARNING: This page is about a different variant/trim than selected.

NOTE:

In the case of the vehicle equipped with immobilizer or button engine start system, perform "Key Teaching" procedure together (Refer to "IMMOBILIZER " or "BUTTON ENGINE START SYSTEM " ).

Turn ignition switch OFF and disconnect the negative (-) battery cable.
Disconnect the ECM connector (A).

Fig 1: ECM Component Location And Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the air cleaner assembly (Refer to "INTAKE AND EXHAUST SYSTEM " ).
After removing the installation bolts (A), remove the ECM (B) from the bracket.

Fig 2: Identifying ECM And Installation Bolts
Courtesy of KIA MOTORS AMERICA, INC.