LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2012 >> Soul Base, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Front/Rear Parking Assist System >> Front Rear Parking Assist System Control Unit >> Description and Operation >> Functional Specification >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Functional Specification: Notes

  1. PAS(Parking Assist System) functional specification.
    1. Use the IGN1 Power. (IGN1 ON action)
    2. PAS SYSTEM is enabled when Moving forward is under the condition of PAS switch On and vehicle speed is under 10 KPH and backward is under 15KPH.
    3. Front System is enabled when Gear is putting somewhere except for 'P' range position or Parking Brake is released.
    4. Gear shifted to 'R', Rear PAS System will start.
      1. Front System makes Front 4 sensors (FL, FCL, FCR, FR) enabled.
      2. Rear System makes the Front 4 sensors (FL, FCL, FCR, FR) and Rear 3 sensors (RR, RC, RL) enabled.
  2. System function flow.
    1. Above 1), 2), 3) or 1), 2), 4) conditions, the system will start.
    2. Front System has no initial starting sound when it starts and does an alarm system when it detects the obstacle according to distance.
    3. When Rear System is in operation, initial starting sound is ringing 0.5 second just after R gear is shifted and conducts the alarm system by the distance.
    4. Some of sensors have faults, Front system or Rear system sends a fault alarm sound and displays the sensors on the cluster.
    5. Alarms of obstacle consists of 3 level 1, 2, 3 step and 1, 2 alarm sounds intermittently and 3 alarm sounds continuously But Front System does not have 1 step alarm, and in 2 step alarm it just turns on the INDICATOR in the cluster.
    6. According to alarm level. Cluster controls turning the INDICATOR on that is in it.
    7. PAS System is in operation under the condition of PAS switch ON, and PAS switch will keep its last status when IGN is OFF even.
    8. PAS switch OFF will be released when the Gear is shifted to 'R' automatically. PAS switch is recover to OFF condition If PAS OFF released when applying 'R' Gear.
      1. IN PAS switch ON, INDICATOR that is in PAS switch turns on and PAS ECU controls the INDICATOR light.
      2. PAS switch Factory initial condition is ON.
scientia non olet · About LEMON Manuals