Repair Procedures: Installation
WARNING: This page is about a different car, the 2013 Kia Sportage and 2012 Kia Sportage. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is the reverse of removal.NOTE: After replacement or reinstallation procedure of the valve body assembly, must perform procedures below.
- Continue to apply liquid gasket at application points at the valve body cover with Ø2.5 mm (0.0984 in.) thickness.
Liquid gasket Part name:
Threebond 1281B or LOCTITE FMD-546 (P/N : UM010CH046) or equivalent
- Adding automatic transaxle fluid. Refer to "HYDRAULIC SYSTEM (FLUID) ".
- Continue to apply liquid gasket at application points at the valve body cover with Ø2.5 mm (0.0984 in.) thickness.