Repair Procedures: Removal

WARNING: This page is about a different car, the 2014 Kia Forte5 and 2014 Kia Forte Koup. However, it is still accessible from the selected car via links, so may be relevant.

Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
Remove the resonator and the air intake hose.
(Refer to "AIR CLEANER ")
Disconnect the ETC module connector (A).

Fig 1: ETC Module Connector
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the water hoses (A).

Fig 2: Water Hoses
Courtesy of KIA MOTORS AMERICA, INC.
Remove the installation bolts, and then remove the ETC module (A) from the engine.

Fig 3: Removing ETC Module
Courtesy of KIA MOTORS AMERICA, INC.