| DTC Strategy |
- Monitoring deviation between target idle speed and actual engine speed during catalyst heating
|
- Checking leakage of air intake
- Checking operation of ETC
|
| Enable Conditions |
- Catalyst heating operating condition (during 20 sec immediately after cold start in 77°F range)
- Idle speed engine operating state
- Vehicle speed < 1.9 mph
|
| Threshold Value |
- Current RPM is lower than target RPM as much as 270RPM (Engine speed too low)
- Current RPM is higher than target RPM as much as 200RPM (Engine speed too high)
|
| Diagnostic Time |
|
| Mil On Condition |
|