Check Short In Signal Circuit
- IG key OFF.
- Disconnect 'CRUISE REMOCON SWITCH' connector and Cluster connector.
- Check resistance between 'Signal (Cruise sw)' terminal and 'CRUISE MAIN' terminal of 'CRUISE REMOCON SWITCH' harness connector.
- Check resistance between 'Signal (Cruise sw)' terminal and 'Ground (Cruise sw)' terminal of 'CRUISE REMOCON SWITCH' harness connector.
Specification : Infinite
- Is the measured value within specification?
YES
- Go to CHECK OPEN IN SIGNAL CIRCUIT .
NO
- Repair short in signal circuit, and go to "VERIFICATION OF VEHICLE REPAIR " procedure.