Signal Waveform & Data
- IG key ON.
- Check sensor data as below.
- Data AnalysisAPS DATA ANALYSIS
Accelerator Position Output Voltage (V) APS1 APS2 C.T 0.7~0.8 0.29~0.46 W.O.T 3.85~4.35 1.93~2.18 - Is data in accordance with "Data Analysis"?
YES
- Check for poor connection between PCM and component: backed out terminal, improper mating, broken locks or poor terminal to wire connection. Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Go to next procedure.