Repair Procedures: Removal

Turn the ignition switch OFF and disconnect the negative (-) battery cable.
Disconnect the accelerator position sensor connector (A).

Fig 1: Identifying Accelerator Position Sensor Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the installation bolt (B) and nuts (C), and the remove the accelerator pedal module.

Fig 2: Identifying Accelerator Pedal Module Mounting Bolt
Courtesy of KIA MOTORS AMERICA, INC.

Fig 3: Identifying Accelerator Pedal Module Mounting Nuts
Courtesy of KIA MOTORS AMERICA, INC.