Repair Procedures: Removal

Turn the ignition switch off and disconnect the battery negative (-) cable.
Disconnect the injector drive box (IDB) connector (A).

Fig 1: Identifying Injector Drive Box Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the air cleaner assembly.
(Refer to "AIR CLEANER ")
Remove the main wiring harness (B) after removing the nut (A).

Fig 2: Identifying Main Wiring Harness And Mounting Nut
Courtesy of KIA MOTORS AMERICA, INC.
Remove the IDB bracket assembly (B) after removing the bolts (A).

Fig 3: Identifying IDB Bracket Assembly And Mounting Bolts
Courtesy of KIA MOTORS AMERICA, INC.
After removing the installation bolts (A), remove the IDB from the bracket.

Fig 4: Identifying IDB And Installation Bolt
Courtesy of KIA MOTORS AMERICA, INC.