| DTC Strategy |
|
- Open in power supply harness or signal harness
- Short to ground in power supply or signal harness
- Poor connection or damaged harness
- Faulty TPS2
|
| Case1 |
Enable Conditions |
|
| Threshold Value |
|
| Case2 |
Enable Conditions |
- Ignition "ON"
- Engine operating state idle:
Pedal value < 0.01%
- TPS setpoint < 58%
- TPS 1 and TPS 2 ratio failure detected or TPS 1 failure detected
|
| Threshold Value |
|
| Diagnostic Time |
|
| MIL On Condition |
|
| Limp-Home |
- Forced limited power mode: When the DTC is set, the PCM/ECM reduces engine torque by 25% of normal value
- The PCM/ECM uses TPS1 signal to monitor the controlled opening angle of the throttle valve
|