System Inspection

Resetting Adaptive Values
1. Connect GDS to DLC (Data Link Cable).
2. IG "ON" & ENG "OFF"
3. Select the "Vehicle S/W Management" about related DTC with GDS.
  
  Fig 1: Scantool Display - Resetting Adaptive Values (1 Of 4)
  Courtesy of KIA MOTORS AMERICA, INC.
  
  Fig 2: Scantool Display - Resetting Adaptive Values (2 Of 4)
  Courtesy of KIA MOTORS AMERICA, INC.
  
  Fig 3: Scantool Display - Resetting Adaptive Values (3 Of 4)
  Courtesy of KIA MOTORS AMERICA, INC.
  
  Fig 4: Scantool Display - Resetting Adaptive Values (4 Of 4)
  Courtesy of KIA MOTORS AMERICA, INC.
4. Has the problem been corrected?
  YES
  - Go to "VERIFICATION OF VEHICLE REPAIR " procedure.
  NO
  - Substitute with a known-good ECM and check for proper operation. If the problem is corrected, replace ECM and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.