LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2015 >> Forte5 SX, Standard Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (1 Of 2) - 1.6L >> DTC P0113: Intake Air Temperature Sensor 1 Circuit High Input >> DTC Inspection >> Monitor GDS Data
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Monitor GDS Data

  1. Connect GDS to DLC (Data Link Cable).
  2. Check the "Current Data"  about related DTC with GDS.
    Fig 1: Scantool Display - IG On & Engine Off (Cold Condition)
    G09747733Courtesy of KIA MOTORS AMERICA, INC.
    Fig 2: Scantool Display - Engine Idle After Warm Up
    G09747734Courtesy of KIA MOTORS AMERICA, INC.
  3. Are the parameters displayed correctly?

    YES 

    • Fault is intermittent caused by poor contact in the sensor's and/or ECM's connector or was repaired and ECM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

scientia non olet · About LEMON Manuals