LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2015 >> K900 V6 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.8L >> Canister Close Valve (CCV) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Open the trunk.
  2. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  3. Remove the floor mat in the trunk (Refer to Body - " TRUNK TRIM ").
  4. Remove the Partition board trim (A).
    Fig 1: Identifying Partition Board Trim
    G10717105Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the service cover (A).
    Fig 2: Identifying Service Cover
    G10717106Courtesy of KIA MOTORS AMERICA, INC.
  6. Disconnect the canister close valve connector (A).
  7. Disconnect the vapor hose (B) from the canister.
  8. Remove the fuel tank air filter mounting bolt (C).
  9. Remove the canister close valve mounting bolts (D).
  10. Remove the canister close valve from the fuel tank air filter.
    Fig 3: Identifying Canister Close Valve Mounting Bolts And Vapor Hose
    G10717107Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals