Repair Procedures: Removal
- Open the trunk.
- Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
- Remove the floor mat in the trunk (Refer to
Body - "
TRUNK TRIM
").
- Remove the Partition board trim (A).
Courtesy of KIA MOTORS AMERICA, INC.
- Remove the service cover (A).
Courtesy of KIA MOTORS AMERICA, INC.
- Disconnect the canister close valve connector (A).
- Disconnect the vapor hose (B) from the canister.
- Remove the fuel tank air filter mounting bolt (C).
- Remove the canister close valve mounting bolts (D).
- Remove the canister close valve from the fuel tank air filter.
Courtesy of KIA MOTORS AMERICA, INC.