LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2015 >> K900 V8 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 5.0L >> Engine Control Module (ECM) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Remove the engine room LH side cover (A).
    Fig 1: Identifying Engine Room LH Side Cover
    G10713691Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the IDB connector (A).
    Fig 2: Identifying IDB Connector
    G10713692Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the harness installation nut (A) and ground bolt (B), and then remove the harness (C).
    Fig 3: Identifying Harness Installation Nut And Ground Bolt
    G10713693Courtesy of KIA MOTORS AMERICA, INC.
  5. Disconnect the ECM connector (A) and the TCM connector (B).
  6. Remove the ECM & TCM bracket mounting bolts (C) and nut (D).
    Fig 4: Identifying ECM And TCM Bracket Mounting Bolts And Nut
    G10713694Courtesy of KIA MOTORS AMERICA, INC.
  7. After removing the mounting bolts (A), remove the TCM bracket assembly (B).
    Fig 5: Identifying TCM Bracket Assembly Mounting Bolts
    G10713695Courtesy of KIA MOTORS AMERICA, INC.
  8. After removing the mounting nuts (A), remove the ECM (B) from the bracket
    Fig 6: Identifying ECM Mounting Nuts
    G10713696Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals