LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2015 >> Sorento EX, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.3L >> Canister Close Valve (CCV) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Lift the vehicle.
  3. Disconnect the canister close valve connector (A).
  4. Disconnect the ventilation tube quick-connector (B) from the fuel tank air filter and canister close valve.
    Fig 1: Ventilation Tube Quick-Connector And Canister Close Valve Connector
    G09765386Courtesy of KIA MOTORS AMERICA, INC.
  5. Disconnect the vapor tube quick-connector (A).
  6. Remove the canister assembly bracket (D) after removing the mounting bolts (B) and nut (C).
    Fig 2: Vapor Tube Quick-Connector, Canister Assembly Bracket And Mounting Bolts
    G09765387Courtesy of KIA MOTORS AMERICA, INC.
  7. Remove the canister braket (B) installation bolt (A).
    Fig 3: Removing Canister Bracket
    G09765388Courtesy of KIA MOTORS AMERICA, INC.
  8. Remove the fuel tank air filter & canister close valve assembly (A) after rotating it in the direction of the arrow in the figure.
    Fig 4: Removing Fuel Tank Air Filter & Canister Close Valve Assembly
    G09765389Courtesy of KIA MOTORS AMERICA, INC.
  9. Release the lever (A), and then separate the canister close valve (B) from the fuel tank air filter (C) after rotating it in the direction of the arrow in the figure.
    Fig 5: Canister Close Valve Lever
    G09765390Courtesy of KIA MOTORS AMERICA, INC.
    Fig 6: Canister Close Valve And Fuel Tank Air Filter
    G09765391Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals