DTC Information: DTC Detecting Condition

Item		Detecting Condition	Possible Cause
Case 1	DTC Strategy	High pressure sensor output jitter	Poor connection FRPS Abnormal fuel pressure Low or no fuel
	Enable Conditions	Sensor Output Voltage greater than 4.85V and less than 0.20V
	Threshold Value	Sensor output voltage jump time less than 0.06 sec.
	Diagnostic Time	1 sec.
Case 2	DTC Strategy	Rationality check negative offset
	Enable Conditions	Multiplicative Long Term FT less than 0.8 % Adaptive Long Term FT less than -6.0 % IG ON: Before Engine Start
	Threshold Value	Rail Pressure less than 0.13 Mpa (1.3 bar/18.85 psi)
	Diagnostic Time	6 sec.
Case 3	DTC Strategy	Rationality check positive offset
	Enable Conditions	Multiplicative Long Term FT greater than 1.2 % Adaptive Long Term FT greater than 6.0 % Soaking Time greater than 4 hr IG ON: Before Engine Start
	Threshold Value	Rail Pressure greater than 1.3 Mpa (13 bar/188.54 psi)
	Diagnostic Time	Immediate
MIL ON Condition		2 driving cycles