Repair Procedures: Replacement

WARNING: This page is about a different car, the 2016 Kia Soul EV. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Put on gloves to protect your hands.

NOTE:

When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.

Remove the tail gate trim.
(Refer to Tail Gate - "TAIL GATE TRIM ")
After loosening the mounting bolts, remove the tail gate latch assembly (A).
Tightening Torque:

6.9~10.8 N.m (0.7~1.1 kgf.m, 5.1~8.0 lb-ft)

Fig 1: Remove Tail Gate Latch Assembly
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the tail gate latch connector (A).

Fig 2: Disconnect Tail Gate Latch Connector
Courtesy of KIA MOTORS AMERICA, INC.
Install in the reverse order of removal.
Information
- Make sure that the tail gate locks/unlocks and opens/closes properly.
- Adjust the tail gate alignment.
- Make sure that the connectors are connected properly.