| DTC Strategy |
- This code detects a continuous short to low or open in either the signal circuit or the MAPS
|
- Poor Connection
- Open or short to ground in power circuit
- Open or short to ground in signal circuit
- MAPS
- PCM
|
| Enable Conditions |
Case 1 |
- No TPS Active Fault Present
- Ignition Voltage greater than 11V
- Engine Speed lower than 1000rpm
- Throttle Position greater than 0%
|
| Case 2 |
- No TPS Active Fault Present
- Ignition Voltage greater than 11V
- Engine Speed higher than 1000rpm
- Throttle Position greater than 30%
|
| Threshold value |
- MAP Signal less than 0.25V
|
| Diagnosis Time |
- Continuous (More than 2.5 seconds failure for every 5 seconds test)
|
| MIL On Condition |
|