LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (2 Of 3) >> DTC P0223: Throttle Position Sensor 2 Signal Circuit High Input >> Wiring Inspection >> Terminal and Connector Inspection
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Terminal and Connector Inspection

  1. Disconnect the ETC Motor, TPS and PCM connectors and inspect for looseness, poor connection, bending, corrosion, contamination, deterioration or damage. Reconnect the connectors.
  2. Connect the GDS and go to "Current Data".
  3. Monitor TPS values in Current Data, check and wiggle the harness (es), connector (s), and terminal (s).
  4. Any change in the values indicates a poor connection. Was a connector problem found?

    YES 

    NO 

scientia non olet · About LEMON Manuals