Repair Procedures: Replacement

WARNING: This page is about a different car, the 2016 Kia Forte5 and 2016 Kia Forte Koup. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch OFF.
Disconnect the negative (-) battery cable.
Disconnect the TCM connector (A).

Fig 1: Locate Transaxle Control Module (TCM) Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the TCM (A) after removing the bolt and nut.
TCM installation bolt/nut:

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Fig 2: Remove Transaxle Control Module (TCM) Bolts

Courtesy of KIA MOTORS AMERICA, INC.