Repair Procedures: Replacement

WARNING: This page is about a different variant/trim than selected.

Turn ignition switch OFF.
Disconnect the negative (-) battery cable.
Disconnect the TCM connector (A).

Fig 1: Locate TCM Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the TCM (A) after removing the bolt and nut.
TCM installation bolt/nut:

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Fig 2: Remove TCM Bolt And Nut
Courtesy of KIA MOTORS AMERICA, INC.