System STATES in LEARNT MODE
WARNING: This page is about a different car, the 2015 Kia Forte5, 2015 Kia Forte Koup, and 2015 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
In learnt mode, the BES System can be set in 6 different sates, depending on the status of the terminals, ESCL and Engine status:
| System State | Terminal Status | ESCL Status | Engine status |
|---|---|---|---|
| 1. OFF - Locked | OFF | Locked | Stopped |
| 2. OFF - Unlocked | OFF | Unlocked | Stopped |
| 3. ACC | ACC | Unlocked | Stopped |
| 4. IGN | IGN1, IGN2, ACC | Unlocked | Stopped |
| 5. Start | IGN1, Start | Unlocked | Cranking |
| 6. IGN - Engine | IGN1, IGN2, ACC | Unlocked | Running (means "self-running") |
Referring to the terminals, the system states described in the table above are same as those one found in a system based on a mechanical ignition switch. The one of distinction with Mechanical-Ignition-Switch based system is that the BES system allows specific transition from [OFF] to [START] without going through [ACC] and [IGN] states.