Repair Procedures: Removal

WARNING: This page is about a different car, the 2015 Kia Forte5, 2015 Kia Forte Koup, and 2015 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.

Information

The oil temperature sensor is integrated with the solenoid valve main connector and can not be disassembled. The oil temperature sensor should be replaced with the solenoid valve main connector.

Move the shift lever to "N" range.
Remove the valve body assembly.
(Refer to "REMOVAL ")
Disconnect the input & output speed sensor connector (A).
Loosen the solenoid valve harness bolts (B).
Tightening Torque:

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Fig 1: Input/Output Speed Sensor Connector And Bolts
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the solenoid valve connector (A).

Fig 2: Solenoid Valve Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the clip (A) and then remove the connector by pressing it downward.
Tightening Torque:

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Fig 3: Connector And Clip
Courtesy of KIA MOTORS AMERICA, INC.