Repair Procedures: Removal

Release the residual pressure in fuel line.
(Refer to the Fuel Delivery System - Repair Procedures - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ".)
Turn the ignition switch OFF, and then remove battery (-) cable.
Remove the installation nut (B), and then disconnect the fuel feed tube (A).

Fig 1: Locate Fuel Feed Tube
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the vapor hose (A) which is connected from the PCSV.

Fig 2: Locate Vapor Hose
Courtesy of KIA MOTORS AMERICA, INC.
Lift the vehicle.
Remove the fuel tank.
(Refter to Fuel Delivery System - "Fuel Tank")
Remove the vapor tube and low fuel line fixing clip (A) by using a common driver.

Fig 3: Remove Vapor Tube And Low Fuel Line Fixing Clip
Courtesy of KIA MOTORS AMERICA, INC.
Remove the installation nuts, and then push the heat protector in the direction of an arrow.

Fig 4: Push Heat Protector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the installation bolts (A), and then remove the fuel line fixing clip (B).

Fig 5: Remove Fuel Line Fixing Clip
Courtesy of KIA MOTORS AMERICA, INC.
Release the fuel & brake line protector (A) by disconnecting the fixing clip.

Fig 6: Locate Fuel & Brake Line Protector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the fuel line.

Fig 7: Remove Fuel Line

Courtesy of KIA MOTORS AMERICA, INC.