Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.

Turn the ignition switch OFF, and then remove the battery negative (-) terminal.
Release the residual pressure in fuel line.
(Reter to Fuel Delivery System - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")
Disconnect the low pressure fuel quick-connector (A).

Fig 1: Locate Low Pressure Fuel Quick-Connector
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the vapor hose (A) which is connected to the PCSV.

Fig 2: PCSV Vapor Hose
Courtesy of KIA MOTORS AMERICA, INC.
Remove the fuel tank.
(Refer to Fuel Delivery System - "FUEL TANK ")
Remove the fuel tube clamp mounting bolt (A).

Fig 3: Fuel Tube Clamp Mounting Bolt
Courtesy of KIA MOTORS AMERICA, INC.
Remove the fixing clips (A).

Fig 4: Fuel Line Fixing Clips
Courtesy of KIA MOTORS AMERICA, INC.
Remove the brake & fuel line protect.

Fig 5: Fuel Line Protection
Courtesy of KIA MOTORS AMERICA, INC.
Remove the fixing clips.

Fig 6: Fuel Line Fixing Clips
Courtesy of KIA MOTORS AMERICA, INC.
Remove the fuel line (A).

Fig 7: Vehicle Fuel Line

Courtesy of KIA MOTORS AMERICA, INC.