Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect the negative (-) battery terminal.
Remove the driver airbag module.
(Refer to Restraint - "DRIVER AIRBAG (DAB) MODULE AND CLOCK SPRING ")
Remove the steering wheel.
(Refer to Steering System - "STEERING COLUMN AND SHAFT ")
Remove the steering wheel cover (A) after loosening the screw.

Fig 1: Remove Steering Wheel Cover
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the steering heater connectors (A).

Fig 2: Steering Heater Connectors Location
Courtesy of KIA MOTORS AMERICA, INC.
Remove the steering remote control switch assembly after loosening the mounting screws (4EA).

Fig 3: Remove Steering Remote Control Switch Assembly Mounting Screws (4EA)
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the switch connectors (A).

Fig 4: Disconnect Switch Connectors
Courtesy of KIA MOTORS AMERICA, INC.
Remove the cruise control switch (A) after loosening the mounting screws.

Fig 5: Remove Cruise Control Switch

Courtesy of KIA MOTORS AMERICA, INC.