LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Forte5 SX, Automatic Trans >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Axle Shafts >> Driveshaft Assembly >> Dynamic Damper >> Repair Procedures >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Repair Procedures: Installation

  1. Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper.
  2. Install the dynamic damper.
  3. Install the dynamic damper band (A).
  4. Using the SST(09495-3K000), secure the TJ boot bands (B).

    Clearance (A): 2.0 mm (0.0787 in.) or less

    Fig 1: Locate TJ Boot Bands And Dynamic Damper Band
    G11795392Courtesy of KIA MOTORS AMERICA, INC.
  5. Install the TJ joint assembly.

    (Refer to Driveshaft Assembly - "TJ JOINT ")

  6. Install the front driveshaft.

    (Refer to Driveshaft Assembly - "FRONT DRIVESHAFT ")

  7. Check the front alignment.

    (Refer to Suspension System - "FRONT ALIGNMENT ")

scientia non olet · About LEMON Manuals