General Information
WARNING: This page is about a different variant/trim than selected.
Information related immobilizer, that are classified as 2 (two) parts independently, is memorized in EEPROM. PCM/ECM check these 2 (two) information before proceeding immobilizer authentication.
With synchronized both information, PCM/ECM starts immobilizer authentication procedure.
If both information is not synchronized, PCM/ECM stops immobilizer authentication, Limphome function will not be activated, and memorizes DTC P1695.
If DTC P1695 is retrieved again, after performing new key teaching procedure, PCM/ECM should be replaced with new one.