Repair Procedures: Removal

Disconnect the negative (-) battery terminal.
Remove the driver crash pad lower panel.
(Refer to - CRASH PAD )
Remove the steering column upper and lower shrouds.
(Refer to - REMOVAL )
Remove the wiper switch.
(Refer to - REMOVAL )
Remove the ignition switch after disconnecting the ignition switch 6P connector (A)

Fig 1: Locating Ignition Switch 6P Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the key warning/immobilizer connector (A).

Fig 2: Locating Key Warning/Immobilizer Connector
Courtesy of KIA MOTORS AMERICA, INC.
After loosening the screw, remove the key warning switch and key Illumination (A).

Fig 3: Locating Key Illumination
Courtesy of KIA MOTORS AMERICA, INC.
Pushing lock pin with key ACC.

Fig 4: Pushing Lock Pin With Key On ACC
Courtesy of KIA MOTORS AMERICA, INC.
Remove the key lock cylinder (A).

Fig 5: Removing Key Lock Cylinder

Courtesy of KIA MOTORS AMERICA, INC.