LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Sedona SX >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Manifold Absolute Pressure Sensor (MAPS) >> Repair Procedures >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the Manifold Absolute Pressure Sensor connector (A).
  3. Remove the mounting bolt (B), and then vertically remove the sensor from the surge tank.
Fig 1: Locating Manifold Absolute Pressure Sensor Connector & Mounting Bolt
G11856641Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals