Repair Procedure: Removal

Release the residual pressure in fuel line.
(Refer to the Fuel Delivery System - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")
Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
Remove the second row seat.
(Refer to Body - "REAR SEAT ")
Remove the rear seat LH air duct (A) after loosening the mounting nuts.

Fig 1: Locate Rear Seat LH Air Duct
Courtesy of KIA MOTORS AMERICA, INC.
Remove the seat cable bracket (A) after loosening the mounting nuts.

Fig 2: Locate Seat Cable Bracket
Courtesy of KIA MOTORS AMERICA, INC.
Remove the fuel pump service cover (A) after loosening the mounting screws.

Fig 3: Locate Fuel Pump Service Cover
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the fuel feed tube quick-connector (A), fuel pressure sensor connector (B), fuel pump control module (C) and fuel tank pressure sensor (D).

Fig 4: Locate Fuel Feed Tube Quick-Connector And Fuel Pressure Sensor Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the fuel pump plate cover (A) by using the special service tool (B) [No.: 09310-B8100].

Fig 5: Remove Fuel Pump Plate Cover Using Special Service Tool
Courtesy of KIA MOTORS AMERICA, INC.
Remove the fuel pump (A) from the fuel tank.

Fig 6: Locate Fuel Pump

Courtesy of KIA MOTORS AMERICA, INC.

Fig 7: Remove Fuel Pump From Fuel Tank

Courtesy of KIA MOTORS AMERICA, INC.