LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Sorento L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Engine Control System - 2.0L) >> Accelerator Position Sensor (APS) >> Repair Procedure >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedure: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the upper mounting cap (B), and then remove the mounting nut (C).
  4. Remove the lower mounting cap (D), and then remove the mounting nut (E).
Fig 1: Locate Upper And Lower Mounting Cap
G11862237Courtesy of KIA MOTORS AMERICA, INC.
Fig 2: Locate Accelerator Position Sensor Connector And Mounting Nuts
G11862238Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals