Repair Procedure: Inspection

WARNING: This page is about a different variant/trim than selected.

Turn ignition switch OFF.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "BATTERY ")
Disconnect the solenoid valve connector (A).

Fig 1: Disconnect Solenoid Valve Connector
Courtesy of KIA MOTORS AMERICA, INC.
Measure the resistance between power terminal (14) and signal terminal (8).
Specification: Approx. 0.88 MΩ

Fig 2: Solenoid Valve Connector Terminals
Courtesy of KIA MOTORS AMERICA, INC.