Repair Procedure: Inspection

Wave Form 

1. Check the signal waveform of the CMPS and CKPS using the GDS.

   Specification:  Refer to Wave Form  below. "Wave Form"

Coil Resistance 

1. Turn the ignition switch OFF.
2. Disconnect the CKPS connector.
3. Measure resistance between the CKPS terminals 1 and 2.

   Specification: 500 ~ 620 Ω [20°C (68°F)]

   Fig 1: Measure Coil Resistance Between CKPS Terminals 1 And 2

   Courtesy of KIA MOTORS AMERICA, INC.